COVID-19: Kewaunee County Public Health is vaccinating eligible individuals against COVID-19. CLICK HERE FOR INFORMATION
Clean Sweep: Register with Kewaunee County Emergency Management by Wednesday, October 27, 2021. CLICK HERE FOR INFORMATION
Kewaunee County Wisconsin
Well Water Testing


Over 15% of Americans rely on their own private drinking water supplies. There are over 800,000 private wells in Wisconsin alone. Wells can be safe, dependable sources of water if sited wisely and built correctly, but individual owners must take special precautions to ensure the protection and maintenance of this water supply.  The Environmental Protection Agency (EPA) regulates public water systems, but they do not have the authority to regulate private drinking water wells. As an individual water system owner, it is up to you to make sure that your water is safe to drink.

What to Test For?

There are several water quality indicators (WQIs) and contaminants that should be tested for in your water.  A WQI test measures the amount of certain germs in the water.  Presence of these germs may indicate the presence of sewage and other disease causing germs from humans or animal feces.  Pollution can be naturally occurring or caused from human activity. It is important to recognize and understand the potential for pollution in your private well.

When to Test?

At a minimum, check your well every spring to make sure there are no mechanical problems. Test it once each year for total coliform bacteria, nitrates, total dissolved solids, and pH levels (click here for a complete list of common water contaminants).?  If you suspect other contaminants, you should test for those as well. However, spend time identifying potential problems as these tests can be expensive. The best way to start is to consult a local expert, such as the local health department, about local contaminants of concern.

You should also have your well tested if:
  • There are known problems with well water in your area
  • You have experienced problems near your well (i.e., flooding, land disturbances, and nearby waste disposal sites)
  • You replace or repair any part of your well system
  • You notice a change in water quality (i.e., taste, color, odor)
Make sure to test any time you notice a change in how the water looks, tastes or smells. Even if your water looks, tastes and smells good, it can contain harmful bacteria and viruses.

Who Should Test?

Use a certified laboratory to test your drinking water for possible contaminants. Labs that test for bacteria in water are certified by the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP). 
Health or environmental departments, or county governments should have a list of the state-certified (licensed) laboratories in your area that test for a variety of substances.
 “Do-it-yourself” drinking water test kits are available from hardware stores. However, these kits cannot fully evaluate the safety of drinking water and most only inform you whether a substance is present, not the amount. Home water tests can be a useful first step, but rely on certified laboratories for the most accurate results.
For more information, contact the EPA Safe Drinking Water Hotline at (800) 426-4791.

Testing Kits Available:

Water testing kits may be picked up for the Kewaunee County Public Health Department during regular business hours. Water samples are mailed directly to the Wisconsin State Lab of Hygiene for analysis. The cost of the analysis depends on the type of test required.
Pregnant Women and New Moms:

Pregnant women and new mothers are eligible to have a free well water test done to check for water issues that can harm the fetus or child.